Remove speed sensor cover

1.Remove 4 outside bolts on the Speed Sensor Protector and Bearing Protector located on the non driving end.
2. Take Out the Bearing Cover

Tool used in this procedures are:

Hex Wrench Size 20mm

Loosen Speed Sensor Disk

Loosen all three side bolts of speed sensor disk
Note : Leave one bolt in the slot and take out other two

Loosen NDE Fixed Labyrinth

1. Loosen 6 bolts of the NDE Fixed Labyrinth
2. Take out only 4 bolts but leave 2 in place

Tool used in this procedures are:

Allen Key Size 15mm